Wingsland Scarlet Minivet 5.8G FPV With HD Camera RC Quadcopter
http://sh.st/HMrr4
http://goo.gl/MK2BXF
This Wingsland Scarlet Minivet 5.8G FPV With HD Camera RC Quadcopter supports free switching between Right Hand Throttle and Left Hand Throttle.
Description: Minivet User Munual
Aircraft
Brand Name: Wingsland
Item Name: Scarlet Minivet RC Quadcopter
Weight (including batteries and paddle):1085G
Battery:Lithium battery 5200mAh
Propeller:1045
Wheelbase:390mm
Motor:2212
Maximum rising speed:3m/s
Maximum fall speed:2.2m/s
Maximum angle of inclination:30°/s
Maximum angle of rotation:60°/s
Maximum horizontal moving speed (GPS mode):18m/s
Automatic flight speed (POI mode):3m/s
Can hover accuracy (can be safe flight state) vertical:0.5mHorizontal direction1.5m
Remote control
Communication distance (open outdoor):800m
Working frequency:2.4G
Camera
Pixel:4-megapixel
Maximum resolution:1920*1080
HD video:HD1080p 30 or 720p 60
Working frequency:5.8G
Maximum communication distance (open outdoor):600M
PTZ
Angle control precision:±0.1°
Working environment temperature:-5°C-90°C
Controllable rotational range:0°-90°
Maximum control :Pitch60°/s
Features:
GPS positioning
Height changes your aesthetic view
Intelligent Multi-operating Modes
High-precision Return-to-Home
High-precision 3 Axis GIMBAL
Integrated intelligent battery
Built-in OSD for flight parameters display
With 10 Channels controller
Copter/GIMBAL/Camera controllable simultaneously
Support free switching between Right Hand Throttle and Left Hand Throttle.
Brochure,Please Check Here.
Quick Start Guide ,Please Check Here.
Package Included:
1xWingsland Scarlet Minivet RC Quadcopter with 3 Axis gimbal
1xTransmitter
1xHD monitor
1xHD camera
1xBattery
FAQ
The function of two triangular power buttons on battery
Setup of Battery Level Display:
Press two triangular power buttons with holding for 3 seconds till battery
powering on and the Green/Red indicator lightening. This mode is convenient
for user to view the battery level when flying.
It's not control the led lights of drone.The led lights on drone are control by power supply .The led light will start workinguntil you remove the battery.
Remote Control Assistant Software
Following situation need to recalibrate the neutral point of the remote control:
1.Switching over the right hand throttle and left hand throttle
2.Adjust the over-trim switch on the remote control (may be accidentally pressed to)
To use aircraft with a USB connection, according to the plane of the battery compartment to the right of the connection port, open the assistant software on your computer according to instructions.
http://sh.st/HMrr4
http://goo.gl/MK2BXF
